- Dibenzoyl Peroxide
- Tert-Butyl Peroxybenzoate
- Di-Tert-Butyl Peroxide 98%
- Dilauroyl Peroxide 99%
- Tert-Butylperoxy 2-Ethylhexyl Carbonate 98%
- Tert-Amylperoxy 2-Ethylhexyl Carbonate 98%
- Tert-Butyl Peroxy-3,5,5-Trimethylhexanoate 98%
- Tert-Butylperoxy Isopropyl Carbonate 75%
- Tert-Butyl Peroxyacetate 50%
- Tert-Amyl Peroxypivalate 75%
- Tert-Butyl Peroxy-2-Ethylhexanoate 98%
- Tert-Amyl Peroxy-2-Ethylhexanoate 98%
- Tert-Butyl Peroxypivalate 75%
- Tert-Butyl Peroxyneodecanoate 75%
- Di(2-Ethylhexyl) Peroxydicarbonate 75%
- 1,1-Di(Tert-Butylperoxy) Cyclohexane 80%
- 1,1-Di(Tert-Amylperoxy) Cyclohexane 80%
- 1,1-Di(Tert-Butylperoxy)-3,3,5-Trimethylcyclohexane 98%
- Di-Tert-Amyl Peroxide 98%
Products
Industrial Benzoyl Peroxide 50% Powder 94-36-0
BPO 50% powder is a fine, free-flowing, non-caking granular powder consisting of 50% dibenzoyl peroxide, pathalate ester plasticizer and standardized with silica, which can be easily and fast dispersed and dissolved in unsaturated polyester and acrylic resins. Even at a very low temperature a good cure can be available. Dissoluble in alcohol, esters, ethers, olefins and organic solvents. Insoluble in water.
Industrial Benzoyl Peroxide 50% Paste 94-36-0
BPO 50% paste is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form, which can be easily dissolved in resins and monomers.
This product is less hazardous and easier to use than technical or dry forms of dibenzoyl peroxide. Slightly soluble in alcohols, petroleum solvents, insoluble in chlorinated solvents
Tert-Butylperoxy Isopropyl Carbonate 75% 2372-21-6
It is commonly used as a radical initiator in the polymerization and copolymerization of various monomers, including styrene, in a specific temperature range, typically between 95-125°C. During the polymerization process, the temperature is often increased in steps to facilitate the reaction.
This compound is known for its ability to initiate the cross-linking and polymerization reactions, making it an important ingredient in the manufacturing of polymers, plastics, adhesives, coatings, and other polymer-based products.
Tert-Butylperoxy isopropyl carbonate is utilized in the production of thermoset resins, which are widely used in industries such as construction, automotive, and aerospace due to their heat resistance and durability.
It is important to handle and store Tert-Butylperoxy isopropyl carbonate with proper safety measures in place, as it is a reactive and potentially hazardous substance.
Overall, Tert-Butylperoxy isopropyl carbonate plays a crucial role in the production of various polymer-based materials and is an essential component in the manufacturing processes of many industrial products.
Tert-Butyl Peroxypivalate 75% 927-07-1
Tert-Butyl peroxypivalate is an efficient initiator for the
production of Low Density Polyethylene (LDPE). In most cases a combination with other peroxides is used to ensure a broad reactivity range. TBPV is used as an initiator for the suspension polymerization of vinyl chloride in the temperature range between 50°C
and 70°C.
Tert-Butyl Peroxyneodecanoate 75% 26748-41-4
Tert-Butyl peroxyneodecanoate is an organic peroxide compound that is commonly used as a radical initiator in the polymerization of various monomers. It is particularly suitable for the curing of unsaturated polyester resins and vinyl ester resins, leading to the production of composite materials, coatings, and adhesives. Additionally, it can be used in the production of thermoset plastics and elastomers. Tert-Butyl peroxyneodecanoate finds applications in the manufacturing of polymer-based products where the initiation of radical polymerization is required. It is known for its ability to initiate the cross-linking and polymerization processes, contributing to the formation of strong and durable polymer materials.
Tert-Butyl Peroxyacetate 50% 107-71-1
Tert-Butyl peroxyacetate can be used as initiator for the solution (co)polymerization of acrylates and methacrylates in the temperature range of 100-170°C, amongst others for the manufacture of coatings.
Tert-Butyl peroxyacetate can also be applied as an initiator for the bulk and suspension (co)polymerization of acrylates and methacrylates
Tert-Butyl Peroxy-3,5,5-Trimethylhexanoate 98% 13122-18-4
TBPIN is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes. To obtain a wide spectrum of polymerization temperatures, combinations with other peroxides are applied in practice. Depending on reaction conditions, TBPIN is active in the temperature range of 210-240°C. TBPIN can be used as initiator for the solution (co)polymerization of acrylates and methacrylates in the temperature range of 90-175°C, amongst others for the manufacture of coatings. TBPIN can also be applied as an
initiator for the bulk and suspension (co)polymerization of acrylates and methacrylates in the temperature range of 90-130°C. TBPIN may be used for the (co)polymerization of styrene in the temperature range of 90-140°C.
Tert-Amylperoxy 2-Ethylhexyl Carbonate 98% 70833-40-8
It is commonly used as a polymerization initiator in the production of various polymers and plastics. This compound is known for its ability to initiate the cross-linking and polymerization reactions, making it an important ingredient in the manufacturing of adhesives, coatings, and other polymer-based products.
Tert-Amylperoxy 2-ethylhexyl carbonate is also utilized in the production of thermoset resins, which are widely used in the construction, automotive, and aerospace industries. Its chemical properties make it a valuable component in the creation of durable and heat-resistant materials.
Furthermore, this compound is known for its stability and relatively low volatility, making it a safe and effective choice for industrial applications. Its use is regulated and controlled due to its potential reactivity and hazardous nature, and it is important to handle and store it with proper safety measures in place.
Overall, Tert-Amylperoxy 2-ethylhexyl carbonate plays a crucial role in the production of various polymer-based materials and is an essential component in the manufacturing processes of many industrial products.
Tert-Amyl Peroxypivalate 75% 29240-17-3
Tert-Amyl peroxypivalate is an initiator (75% active ingredient
in isododecane) for (co)polymerization of ethylene, styrene, vinyl chloride, vinylidine chloride and polyols.
Polymerization of ethylene: Tert-Amyl peroxypivalate is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes.
To obtain a wide spectrum of polymerization temperatures, combinations with other peroxides are applied in practice.
Polymerization of vinyl chloride: Tert-Amyl peroxypivalate can be applied as an initiator for the suspension polymerization of vinyl chloride in the temperature range between 50°C and 65°C. Tert-Amyl peroxypivalate may be used in combination with other initiators to increase reactor efficiency
Tert-Amyl Peroxy-2-Ethylhexanoate 98% 686-31-7
Tert-Amyl peroxy-2-ethylhexanoate can be used to initiate the (co)polymerization of acrylates and methacrylates in the temperature range between 70°C and 120°C.
Tert-Amyl peroxy-2-ethylhexanoate can be applied in suspension as well as in solvent and bulk polymerization. Tert-Amyl peroxy-2-ethylhexanoate can also be used for the copolymerization of styrene and acrylonitrile and for vinyl acetate based copolymers.
Di(2-Ethylhexyl) Peroxydicarbonate 75% 16111-62-9
EHP is an initiator (75% active
ingredient) for (co)polymerization of ethylene, vinyl
chloride and vinylidene chloride.
Industrial Benzoyl Peroxide 32% 94-36-0
BPO32% can be used as flour bleaching agent. It can also be used as roading marking.
Industrial Benzoyl Peroxide 27% 94-36-0
BPO27% can be used as flour bleaching agent. It can also be used as roading marking.
1,1-Di(Tert-Butylperoxy)-3,3,5-Trimethylcyclohexane 98% 6731-36-8
TMCH is an initiator (90% active ingredient in isododecane) for (co)polymerization of ethylene, styrene, acrylonitrile, (meth)acrylates and diethylene glycol bis(allyl carbonate)-based optical monomers.
1,1-Di(Tert-Butylperoxy) Cyclohexane 80% 3006-86-8
CH80 is an initiator for (co)polymerization of acrylates and methacrylates.
1,1-Di(Tert-Amylperoxy) Cyclohexane 80% 15667-10-4
DTAC may be used as an initiator for the polymerization of styrene. DTAC is a difunctional peroxide. Under equivalent reaction conditions, polymerization times may be reduced by as much as 10% when compared to those generated by monofunctional peroxides with the same activity.
Trigonox® 122-C80 can be successfully applied as an initiator for the (co)polymerization of low density ethylene. Trigonox® 122-C80 may also be used as an initiator for the (co)polymerization of acrylonitrile, acrylates and methacrylates.